Sand and shot blasting hose where moderate [10bar] pressures are encountered. Recommended for delivery of sand, cast steel shot and abrasive materials in general use in the sandblasting services.

Silicon heater hose for heavy duty pressure applications in hostile engine enviroments. Resistant to coolants, cold leaks, cracking, peeling, aging and ozone. Conforms to SAE J20 R3, Class A. Sold in convenient distributor coils of 15 metres.

A silicon radiator/coolant hose for heavy duty pressure connections in hostile engine enviroments. Ideal for extreme temperatures and high performance levels. Conforms to SAEJ20R1, SAEJ20R1 H.T. Class A, TMC Rp303B Grade I & II, Mil Spec A-A-52425 and various heavy duty OEM requirements. Sold in convenient 1 metre lengths.

An extruded rubber hose capable of handling temperature up to 100 deg.C, this hose has been designed for hot water wash-down suitable for food processing industry, packing houses, bottling plants and breweries.

Medium duty extruded rubber hose designed for the transfer of compressed air and water in industrial applications. Yellow weather resistant cover and black oil-mist resistant tube is an excellent and economical alternative to mandrel built hose.

Designed for use in industrial air breathing and commercial deep sea diving applications. U.V. stabilised. Conforms to AS2299 and AS1716

High pressure spray hose resistant to a wide range of pesticide and weedicide chemicals used in spraying applications.

Highly flexible hose with a smooth inside and lightly corrugated outer surface. Particulary suited use in drain cleaning trucks. Resistant to crushing, abrasives and most chemicals.

Highly flexible hose particulary well suited for the collection of enviromental waste products and chemicals. It’s high nitrile content gives this hose improved resistance to mineral oils and animal fats. Ideal for grease trap and septic tank applications especially in colder weather.

Flexible PVC suction hose designed as a discharge hose for bilge and pond pumps. Also used as a dust extraction and light duty airseeder.

Excellent U.V. and abrasion resistance, this corrugated hose is ideal for medium to light duty vacuum and delivery hose for airseeding machines.

A heavy duty suction and discharge hose designed for the transfer of grains. Flexible and high level of U.V. resistance makes this an excellent hose for use as primary, secondary and tertiary lines on air seeder machines. Conforms to AS/NZS 2070 (Plastics for food contact).