Commercial grade Garden Hose manufactured to conform to AS2620. U.V. stabilised. 5 year guarantee

Australian made U.V. protected, reinforced kink resistant even in cold weather. Our most popular garden hose

Australian made U.V. protected, reinforced kink resistant even in cold weather. Our most popular garden hose. Fitted coils

A heavy duty suction and discharge hose designed for the transfer of grains. Flexible and high level of U.V. resistance makes this an excellent hose for use as primary, secondary and tertiary lines on air seeder machines. Conforms to AS/NZS 2070 (Plastics for food contact).

A tough, flexible suction & discharge hose designed for the transfer of water, sludge, slurries, chemicals, grains, sand and gravel. Also suitable for general agricultural use and widely used in mining and construction.

Heavy duty PVC hose designed for the transfer of hot or cold water in the food industry. Also used on washing machines and dishwashers. Up to 70C

Air brake tubing is manufactured from nylon (polyamide) to meet requirements of SAE J844 and DOT FMVSS 571.106 specifications. They are developed specifically for air brake applications. They can also be used in a wide range of instrumentation and secondary air systems. The tubes provide good resistance against ageing caused by heat and light, and have a wide range of operating temperatures -40°F to +200°F (-40°C to +93°C). Manufactured in Black, Blue, Red and Green. Type A tubes are of single w

Air brake tubing is manufactured from nylon (polyamide) to meet requirements of SAE J844 and DOT FMVSS 571.106 specifications. They are developed specifically for air brake applications. They can also be used in a wide range of instrumentation and secondary air systems. The tubes provide good resistance against ageing caused by heat and light, and have a wide range of operating temperatures -40°F to +200°F (-40°C to +93°C). Manufactured in Black, Blue, Red and Green. Type A tubes are of single w

Designed from polyamide material for the conveyance of gases, liquids and air to improve mechanical performance, reduce installation and maintenance costs and has an excellent abrasion and impact resistance. Manufactured in several colours; Black, Natural, Yellow, Red, Green, and Blue. Substitute * for colour

Designed from polyamide material for the conveyance of gases, liquids and air at high pressure at operation temperatures of -20 to +80 degrees C. Excellent abrasion, impact and chemical resistance. Manufactured in Black and Natural. Substitute * for colour

Our most abrasion resistant and high pressure layflat available. It’s ruggedness and high tensile strength make it suitable for use in mining, irrigation, construction and dewatering applications

Well suited for water drainage at open pit mining and at civil engineering/dam construction sites in mountains or other applications where water needs to be moved at significantly higher or lower elevation.