BSP Female Stainless Globe Valve. Typically used for regulating flow through a line where throttling is required and/or frequent operation.

BSP Female Stainless Steel Swingcheck Valve. Commonly used for water, oil, gas, chemicals, corrosive enviroment and liquids where the fluid is conveyed in a straight line by gravity or pumping. The check mechanism of the design incorporates a disc that swings on a hinge, suitable for horizontal installation.

BSP Female Stainless Steel Gatevalve for general purpose fluid transfer up to 200psi working pressure. Maximum working temperature of 180C

BSP Female 3-Way Side-Entry Stainless Steel T-Port Valve. Maximum working temperature of 180C. For air, water, hot/cold corrosive fluids in harsh enviroments.

BSP Female 3-Way Side-Entry Stainless Steel L-Port Valve. Maximum working temperature of 180C. For air, water, hot/cold corrosive fluids in harsh enviroments.

BSP Female Stainless Steel Full Bore 3-piece Ballvalve. Applications include use for air, water, hot/cold corrosive fluids in harsh enviroments up to 180C.

BSP Female Stainless Steel Full Bore 2-piece Ballvalve. Applications include use for air, water, hot/cold corrosive fluids in harsh enviroments up to 180C.

BSP Female Stainless Steel Reduced Bore 1-piece Ballvalve. Applications include use for air, water, hot/cold corrosive fluids in harsh enviroments up to 180C.

Wafer Butterfly Valve Stainless Steel body, Stainless stem and disc. Designed body to suit most international flanges including AS2129, BS10, ANSI, DIN and JIS standards. The wafer style is designed for inline service and relies on a flange either side of the valve to secure it in the pipeline. Standard seal is NBR. Can also be ordered with Single and Double acting actuators on request.

Lugged Wafer Butterfly Valve Cast Iron body, Stainless stem and disc. Designed body to suit most international flanges including AS2129, BS10, ANSI, DIN and JIS standards. The lugs cast into the body are tapped with a metric thread for the fixing of a flange on one side at a time, benefitting that the valve can be mounted at the end of a line without the need of another flange on the discharge side. Standard seal is NBR, EPDM seals also available on request. Can also be ordered with Single and Double acting actuators on request.

Wafer Butterfly Valve Cast Iron body, Stainless stem and disc. Designed body to suit most international flanges including AS2129, BS10, ANSI, DIN and JIS standards. The wafer style is designed for inline service and relies on a flange either side of the valve to secure it in the pipeline. Standard seal is NBR, EPDM seals also available on request. Can also be ordered with Single and Double acting actuators on request.

BSP Female Brass Y-Strainer for media up to 235psi. Features a 1mm (also know as 18 mesh or 1000 micron) stainless steel mesh screen on a 60 degree angle to effectively remove suspended particles. Great for screening a line before a control valve or to stop contaminates spreading further down your line and potentially damaging property. Suited for water, gases and other non corrosive media with temperatures from -20°C to 100°C.