Industrial strength fast setting metal epoxy. 4-6 mins positioning time, can be handled in 30 minutes. Can be drilled, tapped or filed after full cure.

Convenient easy to use dual syringe extra strong epoxy. 30 minutes setting time. No measuring required. Resists water, gasoline and shop solvents. Fully cures in seven hours.

Convenient easy to use dual syringe epoxy. Permanently bonds a variety of materials in 4-6 minutes. No measuring required. Resists water, gasoline, and shop solvents.

Convenient, easy to use dual syringe epoxy. Permanently bonds a variety of materials in 90 SECONDS. No measuring required. Resists water, gasoline and shop solvents.

Originally developed in the USA for the military, Next Generation SUPATAPE is a self bonding wrap made from a special high-quality silicone rubber compound which adheres to itself when wrapped under tension. SUPATAPE forms a non-conductive, air and water tight insulating seal. Resists Fuels, Oils, Acids, Solvents, Salt Water, Road Salt and UV Rays.
- Self-Fusing Insulator
- Permanent Air-Tight Moisture Proof Seal
- Temperature range: -50c to +260c
- Insulates 8000 Volts (per unstretched layer)
- Tensile Strength of 700 psi

Solvent based activator primer specially formulated to accelerate the curing of Ultraloc's anaerobic adhesive range. On part life of up to 30 days.

Solvent based activator primer specially formulated to accelerate the curing of Ultraloc's anaerobic adhesive range. On part life of up to 7 days.

A single component solvent based polyolefin primer. Increases bond speed and strength of Ultraloc cyanoacrylates when used on low energy plastics such as polyethylene, polypropylene & silicone rubber.

A heptane based solvent activator designed to cure excess adhesive outside the bondline. Can be applied during or after assembly to increase cure speeds and the gap filling properties of cyanoacrylate adhesives.

An acetone based solvent for use as a surface cleaner and activator prior to the application of adhesive. Also used for removing adhesive and cleaning applicator equipment.

Industrial strength fast setting metal epoxy. 4-6 minutes positioning time and can be handled in 30 minutes. Can be drilled tapped, sanded and filed after full cure.
- Works Best on: Stainless Steel, Copper, Steel and Aluminum
- Strength 2500 psi

Convenient easy to use dual syringe epoxy. Permanently bonds a variety of materials in 4-6 minutes.
- Perfect for Bonding: Metal, China,Glass and Plastic
- Strength 1200 psi